OPENROAD Electric Hoist 110V Electric Winch 880LBS with Wireless Remote Control

In the Box: 1x 880lbs Electric Winch 1x Yellow Sling 1x Yellow Strap 1x Snatch Hook 4x Hexagon head screws 4x Washers 4x Spring lock washers. Single Line;Lifting Height:19' Double Line/39' Single Line;Lifting Speed:13 FPM Double Line/26 FPM Single Line. 1.5m(4.92ft) Control Cord, Enough Length To Allow You To Operate The Hoist Smoothly From a Safe Distance. The Electric Hoist Is Equipped With a Sling, a Strap And a Snatch Hook, Which Allows You To Have More Choices In The Face Of Different Usage Methods And Different Weights, And The Operation Is More Labor-Saving(Sling:2"x3.45')(Strap:2"x6.24'). The Cable Winch Is Designed With Limit Configuration To Limit Stop.

When Load Hook Is Hoisting Up To Topmost Position, The Limit Weight Touch The Up Limit Bracket, The Micro switch Of Up Limit Bracket Can Cut Off The Circuit And Make The Motor Stop To Insure The Safety Of Operations; When Load Hook Is Lowering Down Nearly To Use Up The Cable, The Micro switch Of Down Limit Bracket Start Work And Cut Off The Circuit And Make The Motor Stop. OPENROAD Electric Hoist Winch Can Be Used To Lift Regular Or Irregular Shape Things As Stones, Trees, Mower, Engine, Truck Top Cover etc. Vertically Or Horizontally In Garage, Ceilings, Loft, Barn, Attic Anywhere And Anytime You Can Imagine, And Is a "Must" In Christmas For Lifting All Kinds Of Heavy Things. Lift Slings Are Included To Make Your Job Easier. Lifting Height:19' Double Line/39' Single Line. Lifting Speed:13 FPM Double Line/26 FPM Single Line. The load hoisting motor: This motor is a magnetic single-phase capacitor motor and is isdated in accordance with Class B.

The magnetic mechanism is constructed as a break and serves as a reliable safety. The Gear Box: Here the dual-stage gear is used. The cogwheel and the shaft are made out of a high quality, heat-treated, hard and tempered steel. The motor and the gear box are integrated as a sing e unit.

The housing is produced through an aluminum die-casting and it is compact and nice. The hoisting drum and framework: The hoisting drum is punched together with a high quality steel, formed, and weldea with steel piping. It is then mounted on the output shaft and the steel rope is then winded up around the object. The hook: the hook is forged from high quality carbon steel.

With the pulley hook, the lifted weight is doubled. The remote control must be easily accessible at all times and must therefore be installed at a distance to the floor of between 0.8 m and 1.5 m. Insert the load hook into the hook bracket of the mounting casing when using the additional load hook with deviating shaft. Loosen the nuts cf the 3 screws localed on the additional toad hook and remove the cover plate located on the side. Place the steel cable around the deviating shaft and reattach the cover plate and nuts.

Please be sure that the lead hook. Deviating shaft is installed properly and that the nuts are securely tighlened. Please insed the load hook attached to the cable into the hook bracket of the mounting casing. The cable winch is designed with limit configuration to limit stop. When load hook is hoisting up to topmost position, the limit weight touch the up limit bracket, the microswitch of up limit bracket can cut off the circuit and make the motor stop to insure the safety of operations; When load hook is lowering down nearly to use up the cable, the microswitch of down limit bracket start work and cut off the circuit and make the motor stop.

Supports any operation of the electric hoist up and down within a range of 1.5m. Please be careful not to stand under the electric hoist when it rises or falls.

Don't use it to lift any People. While lifting a load if the raising power is low, low enough that the load can't be raised, check if the voltage on-site is 230V. The machine works effic ently with a voltage of 230V, if the voltage does not meet the requirements, one must reduce the load. Please be sure that the steel cable cannot be moved more than 15° to the side.

This item is in the category "Business & Industrial\Material Handling\Hoists, Winches & Rigging\Cranes & Hoists\Other Cranes & Hoists". The seller is "off-roadhelper" and is located in this country: US.

This item can be shipped to United States.

Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: No
Brand: OPENROAD