Sewell Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver). NOTE Some devices us RF instead of IR for remote control.
The Blast IR Wireless Pro only works with IR devices. BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit. BlastIR Pro Emitters work when placed within a few inches of the devices you want to control. For results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices.
These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them. Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feetKnown compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M. Control any IR device from a distance.
Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal! 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another. Multizone: Protect from Interference Most IR extenders are programmed to pass any signal that is sent through the receiver.Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup. This has been a requested feature from many of our customers as they have extended IR signals but unintentionally were controlling two devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. Now with the BlastIR Wireless Multizone you are able to ensure you will only control the box that is attached to one of your TVs and the other. The Channel IR System The Multizone feature works on a 10-channel system, this system gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfereing with one another.
The system also gives you the option of using any number of transmitters or receivers on any given channel. This gives you complete freedom of choice for where your displays and devices can be placed without having to complicate your setup. The BlastIR Wireless Multizone Receivers will only communicate with the BlastIR Wireless Multizone Emitters that are set to the same channel.If you happen to own the classic BlastIR Wireless, this product will also work with it. Channel 0 on this product will allow IR signals to be sent between the two diffferent versions. Any product you return must be in the same condition you received it and in the original packaging.
We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category "Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Remote Controls". The seller is "aliza8" and is located in this country: US.
This item can be shipped worldwide.