Wireless Remote Control

600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit


600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit
600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit

600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit   600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit

600lbs Mag lock Access Control Kit with Visionis wireless receiver and remote kit. The 50VS12 kit is a one door 600lbs Maglock Buzz-in kit for doors that opens out.

It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the wireless RF remote, the VIS-8005.

The remote communicates with the wireless receiver, which can program up to 50 remotes, and it has a range of 300 feet. There are two main features on the receiver that will allow you to program the wireless receiver in two different ways.

The default function of the receiver is that when the power is on, the mag lock of your kit is locked and when you press the remote the maglock will unlock temporarily to open the door. The other function that the receiver has is the ON/Off feature. This feature is very like a light switch; when you program this option you would press the remote once and the door will unlock and remain unlocked until you press the button again. When you press the remote again, the door will then lock.

This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door. Keep in mind that this exit button does not bring a delay meaning that you would have to press the exit button while you open the door. The VISIONIS 600 series electromagnetic locks are. Renown with its excellent holding force and the. The series compliance to CE and.

PSB Test are manufactured under the highest quality. Control to achieve the commitment to customer who. Always satisfied with maximum quality and reliability. Voltage Input: 12 VDC / 24 VDC. Current Draw: 12V / 500mA ; 24V / 250mA (±5%).

Holding Force: Up to 600 lbs (272 kg). Hall Effect Contact: SPDT rated 2A at 24 VDC. Anti-Rust Surface Treatment: Blue Zinc Plating. Operating Temperature: 055° C (32131° F). Operating Humidity: 095% (non condensing).

Weight (Magnet): 1.1 kg (±1%). Dimensions: Magnet - (L)250x(W)42x(T)25 mm. Armature - (L)180x(W)38x(T)11 mm. Dual Voltage Selectable (12 VDC or 24 VDC). Hall Effect Sensor Monitoring Output.

Green/Red LED Indication for EM Lock Status. Contact for Door Status Monitoring.

Surge & Spike Protection PCB. Compact Size for Small Doors, Cabinets etc. Full Range of Optional Brackets. Anti Residual Magnetism Kick Off Button. The VSIONIS VIS-8004 RF wireless Receiver. Was built to feed the demand for a device that. Can meet multiple functions without having to. Receiver can be used to control all sorts of. Electrical devices such as Garage door. Openers, Lights, Motorized gates, Mag locks. Electric Strikes, lifts and many more devices. Number of Codes 1,048,576. Operating Distance Up to 320 Feet (100M). Operating Temperature 0-70 C or 32 - 158 F. Of Remotes that are able. To connect to one Receiver. Receiver Output: C dry contact (NO/NC/COM). Receiver Output Functions: 5 (Default) 4 second momentary.

Connectors 5 screw Terminal NO, COM, NC. 2.4 Inches 1.77 Inches1.18. Weight 43g or 1.52 Ounces. Mounting Screws Comes with two mounting screws. The model VIS-8005 is a 1-Channel 315 MHz charcoal and silver remote supplied with a quick-disconnect.

This transmitter (remote) is designed for use with the VISIONIS VIS-8004 1 channel receiver. Transmitter (remote) has over 1,048,576 codes of programming which makes it virtually impossible of the. The receiver programs each specific code; no unauthorized person can gain access.

To the system by reprogramming or duplicating the Transmitter (remote). This transmitter (remote) can be. Programmed locally into the memory of the receiver (VIS-8004). Operating Distance: Up to 320 Feet (100M).

Of Remotes that are able to connect to one receiver: Up to 20. LED Transmission: Blue LED light. Includes: 2 pieces of the 6V CR2016. Over 1,048,576 codes. Instructions to program a new Transmitter (remote). Note: Before you start to program the Transmitter (remote) make sure you have the Receiver ready to be. You may only use the Vsionis Receiver model number VIS-8004.

Each VIS-8004 Visionis receiver can program up to 20 Transmitters (remotes) (VIS-8005). Make sure that while you are programming the transmitter (remote) you have the remote in your hands. Press the programming switch for 3 seconds or more. The channels LED will start to flash quickly. Will indicate that it is in programming mode.

When the LED light begins to Flash, Press the button of the Transmitter (remote) to be programmed. The receivers Channel light will flash once to show that that the transmitter (remote) has. After the transmitter (remote) has been programmed the receiver will. The VIISIONIS Request-to Exit Buttons and Switches offers a variety of options to fit several applications needs. The VSIONIS line is designed to provide a reliable. Source of egress access controlled opening devices in residential, commercial and Industrial locations. The VSIONIS Request-to Exit Buttons may be connected to the request-to-exit input of any access control device or. Directly connected to an electromagnetic lock or Electric strike Device. "PUSH TO EXIT" & "PRESIONE PARA SALIR" inserts included. Fits into standard single-gang box. Large round green color push button.

Five colored, 12-Inch, AWG 18 wire leads. Switch Plate Material: Stainless Steel.

Dimension of Mounted Switch: 57 mm or 2.24 Inch. Dimension of Exit Button: 115L×70W×5H mm or 4.52L×2.75W×0.19H Inch. Background Color: Green Color + PUSH TO EXIT (Black Word). You will receive your RA number and instructions on how to complete your return. RA numbers are valid for 15 days. The item "600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit" is in sale since Thursday, September 24, 2015. This item is in the category "Home & Garden\Home Improvement\Home Security\Door Entry Systems & Intercoms". The seller is "fpc-security" and is located in Miami, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Brazil, Chile, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Maldives, Oman, Reunion, Sri lanka.
  1. Model: 50VS12
  2. Connectivity: Wireless
  3. Type: Access Control Kit
  4. MPN: 50VS12
  5. Brand: Visionis

600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit   600lbs Maglock Access Control Kit with Visionis wireless receiver and remote kit